GameSir Cyclone 2 Wireless Controller with Charging Dock – 1000Hz, TMR Sticks & Hall/Micro Triggers, Black (Open Sealed)

Description

The GameSir Cyclone 2 is a multi-platform wireless gaming controller featuring Mag-Res TMR joysticks, switchable Hall Effect and microswitch trigger modes, and an ultra-responsive polling rate of up to 1000Hz.

It supports PC, Nintendo Switch, Android and iOS through 2.4GHz wireless, Bluetooth and USB-C wired connections. The included charging dock provides a convenient place to store and recharge the controller between gaming sessions.

Key Features

• Mag-Res TMR anti-drift joysticks
• Up to 1000Hz polling rate
• 2.4GHz wireless connectivity
• Bluetooth connectivity
• USB-C wired operation
• Hall Effect analog trigger mode
• Microswitch hair-trigger mode
• Two programmable rear buttons
• Motion controls for compatible Switch games
• Dual vibration motors
• Mechanical-style face buttons
• Adjustable RGB lighting
• Customizable controls and stick settings
• Compatible with PC, Switch, Android and iOS
• Charging dock included
• Rechargeable internal battery
• Xbox-style asymmetrical stick layout
• Color: Black
• Condition: Open Sealed

Mag-Res TMR Joysticks

The Cyclone 2 uses Tunnel Magnetoresistance—or TMR—technology for its analog sticks. TMR sensors use magnetic detection without the conventional physical contact found in traditional potentiometer sticks.

Benefits include:

• Reduced risk of conventional stick drift
• Accurate center positioning
• Smooth directional tracking
• Low power consumption
• Consistent performance over extended use
• Fine control for aiming, racing and movement

Dead zones, sensitivity and response curves can be adjusted through compatible GameSir software.

Up to 1000Hz Polling Rate

When used through a supported wired or 2.4GHz PC connection, the controller offers a polling rate of up to 1000Hz. This allows controller inputs to be reported as frequently as once per millisecond.

The maximum polling rate depends on:

• Connection mode
• Platform
• Firmware version
• Game and software support
• USB or wireless-receiver configuration

Bluetooth connections normally operate at a lower polling rate than wired or 2.4GHz modes.

Hall Effect and Microswitch Triggers

Each trigger can switch between two operating modes.

Hall Effect Analog Mode

The full-range analog mode is suitable for:

• Racing-game acceleration
• Progressive braking
• Flight controls
• Games requiring variable trigger input

Microswitch Hair-Trigger Mode

The short-travel microswitch mode provides rapid button-like activation for:

• First-person shooters
• Competitive action games
• Fast weapon firing
• Games that do not require analog trigger travel

This combination allows users to switch between precise analog control and faster digital-style activation.

Tri-Mode Connectivity

The Cyclone 2 supports three connection methods:

• 2.4GHz wireless
• Bluetooth
• USB-C wired

The best connection method depends on the platform. For competitive PC gaming, wired or 2.4GHz operation is recommended for the highest polling rate and lowest latency. Bluetooth is convenient for supported mobile devices and Nintendo Switch.

Platform Compatibility

Compatibility, button functions and available features can vary by platform and connection mode.

Included Charging Dock

The supplied charging dock provides a dedicated place to store and recharge the controller. It is suitable for keeping the controller accessible while reducing loose charging cables around the gaming setup.

Depending on the bundle version, the dock may also provide storage or connectivity support for the supplied wireless receiver. Confirm the included dock and receiver configuration during the Open Sealed inspection.

Mechanical-Style Face Buttons

The ABXY face buttons use a fast, tactile design intended to deliver more distinct actuation than conventional membrane buttons.

This makes them suitable for:

• Action games
• Fighting games
• Platform games
• Rapid button combinations
• Competitive multiplayer titles

Button feel and noise may differ from traditional membrane controllers.

Programmable Rear Buttons

Two additional rear buttons can be assigned to commonly used controls, reducing the need to remove your thumbs from the analog sticks.

Possible assignments include:

• Jump
• Reload
• Crouch
• Sprint
• Ability activation
• Stick-click commands
• Face-button inputs

Available remapping and macro behavior depend on the selected mode, firmware and software.

Motion Controls

The controller includes motion-sensing functionality for compatible Nintendo Switch games. Gyroscope support depends on the connection mode and game.

Motion control is not guaranteed to function in every PC or mobile title.

Vibration Feedback

Dual vibration motors provide feedback during supported gameplay, including:

• Vehicle impacts
• Weapon firing
• Collisions
• Environmental effects
• Action sequences

Vibration strength can affect battery life and may be adjustable through supported GameSir software.

RGB Lighting

Integrated RGB illumination adds a customizable visual accent to the controller. Available colors, effects and brightness settings can vary depending on firmware and software support.

Reducing or disabling lighting can help extend wireless battery life.

Software Customization

Compatible GameSir software can provide access to settings such as:

• Button remapping
• Stick dead-zone adjustment
• Stick response curves
• Trigger sensitivity
• Vibration intensity
• Motion settings
• RGB lighting
• Polling-rate selection
• Firmware updates

Available features may differ between PC, mobile and Nintendo Switch operation.

Specifications

Package Contents

The package is expected to include:

• GameSir Cyclone 2 wireless controller
• Charging dock
• 2.4GHz wireless receiver
• USB-C cable
• User documentation
• Original internal packaging

Package contents can vary by region or bundle. All accessories should be physically confirmed before resale.

Setup and Connection

PC Using 2.4GHz Wireless

1. Connect the supplied wireless receiver to the computer.
2. Select the controller’s correct operating mode.
3. Switch on the controller.
4. Allow it to pair with the receiver.
5. Confirm operation through Windows or a compatible game.
6. Update the firmware and adjust the polling rate if required.

PC Using USB-C

1. Connect the controller directly to the computer with a data-capable USB-C cable.
2. Select the correct PC mode.
3. Allow Windows to detect the controller.
4. Test buttons, sticks and triggers.
5. Configure settings through compatible GameSir software.

Nintendo Switch

1. Enable wired-controller communication if using a cable.
2. Select the correct Switch mode.
3. Pair the controller through the Switch controller menu.
4. Test the buttons, motion controls and vibration in a compatible game.

Android or iOS

1. Select the required Bluetooth mode.
2. Open the device’s Bluetooth settings.
3. Choose the controller from the available-device list.
4. Launch a game with controller support.
5. Configure button mapping if supported.

Open Sealed Inspection Checklist

Because this unit is sold as Open Sealed, verify the following:

• Confirm it is the GameSir Cyclone 2, not the original Cyclone model.
• Check that the controller color is Black.
• Inspect the shell for cracks, scratches or separation.
• Check both TMR sticks for smooth movement and proper centering.
• Test the sticks for drift using controller-testing software.
• Test every face button, shoulder button and D-pad direction.
• Verify both analog triggers register their full range.
• Test the microswitch hair-trigger mode.
• Check both rear programmable buttons.
• Test wired USB-C operation.
• Test 2.4GHz wireless connectivity.
• Test Bluetooth connectivity.
• Confirm the wireless receiver is included.
• Verify the charging dock is included.
• Check that the controller sits securely on the dock.
• Confirm normal dock charging operation.
• Inspect the USB-C port and charging contacts.
• Check the internal battery for abnormal heat or rapid discharge.
• Test vibration motors.
• Test motion controls with a compatible Switch game.
• Check RGB lighting for defective or uneven LEDs.
• Confirm the controller is detected by GameSir software.
• Check for available firmware updates.
• Verify the USB-C cable and documentation are present.
• Inspect the original box and internal packaging.
• Confirm seller warranty coverage separately.

Important Notes

• The controller is not compatible with Xbox consoles.
• It is not compatible with PlayStation consoles.
• The 1000Hz polling rate is not available in every connection mode.
• Wired or 2.4GHz PC mode is recommended for the maximum polling rate.
• Bluetooth normally operates at a lower polling rate.
• Motion controls may only be available in supported modes and games.
• Mobile games must provide controller support.
• Trigger and button customization can vary by platform.
• The wireless receiver is required for 2.4GHz operation.
• A USB-C cable must support data for wired PC use.
• Battery runtime depends on vibration, lighting, polling rate and connection mode.
• Firmware should be updated before testing advanced features.
• This is a third-party controller and is not manufactured by Nintendo, Microsoft, Sony, Android or Apple.
• Open Sealed condition and warranty coverage depend on the seller.

Best For

• Competitive PC gaming
• Nintendo Switch gaming
• Android and iOS controller-supported games
• First-person shooters
• Racing and driving games
• Platform and action games
• Players concerned about conventional stick drift
• High-refresh gaming setups
• Users who prefer rear programmable buttons
• Desks requiring an included charging dock

Why Choose the GameSir Cyclone 2?

• TMR joysticks provide accurate magnetic stick sensing.
• Offers a polling rate of up to 1000Hz.
• Supports wired, Bluetooth and 2.4GHz connections.
• Switchable trigger modes suit racing and shooting games.
• Includes two programmable rear buttons.
• Supports PC, Switch, Android and iOS.
• Includes a dedicated charging dock.
• Provides motion control and vibration feedback.
• Customizable software settings allow personalized control.
• Combines competitive input features with convenient wireless operation.